In this Article

As Alison and her boyfriend Jeff have increased their living space, they've also enhanced their SmartThings setup. While they use SmartThings each…

Share this Blog Post

As Alison and her boyfriend Jeff have increased their living space, they’ve also enhanced their SmartThings setup. While they use SmartThings each day to secure their home and save them money on energy bills, the most memorable time they’ve relied on SmartThings has come on a night when they least expected to need it.

“We can’t imagine a life without SmartThings now that we’ve been using it for so long. Jeff got started with it after discovering the company on Kickstarter and backed it right away. Since our Kit arrived, we’ve been adding to the list of cool things we can do with SmartThings.

pixelandbrutus
Pixel and Brutus–all 200 pounds of them.

When SmartThings first arrived at our door, we were renting a condo. We started with the basics by using the SmartThings Hub, a SmartPower Outlet, and a SmartSense Multi Sensor to monitor whether our main doors were open or closed (which prevented more than one occurrence of our dogs escaping), as well as to turn on the living room lamp just by opening the door. As long as the sun had set for the day, the lamp would turn on regardless of which door we used.

The SmartPower Outlet simply plugs into the wall, so those are easy to plug in and then unplug when it’s time to move. The sensors use an adhesive that we could remove from our doors without damaging them, so we could rest easy knowing we wouldn’t lose our security deposit for mounting those on the front door and garage door.

After living in that condo for about a year, we started the process of building a house, which gave us a lot more freedom to incorporate SmartThings into our home + routine.

http---makeagif.com--media-11-04-2014-h_CIPN
Be alerted & prevent a leak from causing a flood.

One of the major pluses of using SmartThings is that it’s portable. We brought our Hub, outlets, and multi sensors with us, but also picked up some SmartSense Moisture sensors, SmartSense Motion sensors, a Filtrete 3M-50 WiFi thermostat, and installed Schlage Camelot Touchscreen Deadbolt locks on all exterior doors. We even got a LiftMaster MyQ garage door opener. With those pieces, we were able to use SmartThings in every room of the house and on the exterior, too!

We use the SmartSense Moisture sensors to make sure that our washer isn’t leaking any water. We’ve set one in the washer tray in the laundry room, and another near the sump pump in the basement. The SmartSense Motion sensors keep tabs on the house while we’re gone–but mostly, they just let us know which room the dogs have moved into and whether or not they’re sleeping.

http---makeagif.com--media-11-04-2014-j71Me2
Be notified when the mail comes each day.

We can lock, unlock, monitor all exterior doors as long as we have our smartphones on us. The same is true for our garage door. (Ahem… one of us… and I’m not naming names… had a harder time getting used to having to shut the garage door, so this setup has come in huge handy for us.)

Now that we’re up and running in our new SmartThings house, here are some of the things that we love the most:

1) Getting a notification when our mail arrives each day. We put a SmartSense Multi on the mailbox cover, and so we know each time it opens and closes.

2) Automating the outdoor lights to turn on and shut off at a specified time each day.

3) Being able to automatically trigger the thermostat to turn down when we both leave the house each day (and are carrying our smartphones), and then triggering it to turn back on when we arrive home.

4) Monitoring our home by installing a Foscam cameras around the exterior of our house and integrating them with SmartThings.

smartthing_alisonmonday_dingdongditcher
SmartThings catches the ding-dong-ditcher red-handed.

In fact, soon after we installed these outdoor security cameras and set them up with SmartThings to snap a series of photos if any movement was detected while we weren’t home or after sunset, something really funny happened.

Late one night, we awoke to the sound of our doorbell ringing. Not knowing who could possibly be stopping by in the middle of the night, we stayed in bed. The next morning, we checked our SmartThings app and sure enough, SmartThings caught footage of our very first ding-dong-ditcher ringing the doorbell and running away!

SmartThings has since caught a second ding-dong-ditcher on camera… but it was a midday joke from a family member.” – Alison
––––––––––––
Alison is a self-employed web designer + developer. Jeff is a systems engineer. They are both total nerds for technology, automation + The Walking Dead. Their dogs, Brutus and Pixel are waiting for SmartThings to develop a line of treat dispensers and peanut butter jar openers.

Subscribe for more articles like this!

Your email address
[contact-form-7 id="831e457" title="Contact form"] You may opt-out at any time. Privacy Policy.

Learn more about becoming a SmartThings partner.

Work With Us

Inspire the world and create the future of IoT at SmartThings.

You Might Also Like...

SmartThings Updates

August 14, 2014

SmartThings, Samsung, and the Open Platform

Friends, Today is a big day for SmartThings. I’m excited to announce that SmartThings has been acquired by Samsung and will operate as an independent company within Samsung’s Open Innovation Center group. It has always been our goal to create a totally open smart home platform that brings together third-party developers, device makers, and consumers. We’re thrilled that Samsung fully supports this vision. We will continue to run SmartThings the way we always have: by embracing our community of customers, developers, and device makers and championing the creation of the leading open platform for the smart home. Our growing team will remain fully intact and will relocate to a new headquarters in Palo Alto, CA. In short: SmartThings will remain SmartThings. (more…)
Read More
SmartThings Updates

March 31, 2015

Update: SmartThings Hub & Hardware V2

Earlier this year we announced that we’ll soon unveil the next generation of the SmartThings Hub and several sensors. We wanted to provide a quick update on our progress to date. (more…)
Read More
SmartThings Updates

September 3, 2015

The Next Generation of SmartThings is Here

We’re excited to announce that the next generation of the Samsung SmartThings Hub, a new lineup of products, and a brand-new SmartThings app experience is available today. Our mission has always been to create the easiest way for people to turn their home into a smart home. In fact, we started SmartThings out of a desire to know the answer to a basic but deeply personal question: is everything OK in my home.  We believe our latest product evolution delivers on this ambition. Here's a look at what's new and improved: The New Samsung SmartThings Hub and Sensors The new Hub enables video streaming, has battery backup that lasts up to 10 hours, and can run certain functions locally to improve performance and continue to operate without an internet connection. The Hub will continue to support ZigBee, Z-Wave, and local internet connected devices. Two USB ports and embedded Bluetooth will support future expansion. The new collection of Samsung SmartThings sensors are now smaller and have been redesigned with a sleeker, more contemporary look to fit seamlessly into the background of your home. The New SmartThings App Experience The free SmartThings app has been redesigned for easier navigation and a more intuitive experience.  You can now directly organize and control your connected devices by room, view live streaming from cameras, quickly set up and run routines, explore the marketplace of nearly 200 devices now compatible with SmartThings, and so much more. One of the exciting new features of the SmartThings app experience is Smart Home Monitor– an integrated home monitoring solution. Smart Home Monitor allows you to receive alerts and take action when SmartThings detects unwanted entry or motion, smoke or fire, leaks, or other important activity. Existing customers will be able to configure Smart Home Monitor from their dashboard within 24 hours after downloading the updated app. With Smart Home Monitor, our Hub version 2, and a connected camera, you can also get instant alerts with an accompanying video-clip when these unexpected events occur.  Video buffering in the new hub means clips can start prior to the event so you can see exactly what is happening in your home. Video clips will eventually be a premium feature within Smart Home Monitor but are available in beta as a free trial through 2015. After the free trial, a premium version of Smart Home Monitor, which includes video clips, will be available for $4.99 per month. Live streaming will always be free. The new SmartThings app will be available for free download on iOS and Android starting today, with Apple Watch, and Gear S apps to follow. Be sure to check out our post for a more in-depth look at the app’s new features. We would like to extend our heart-felt thanks to our customers, supporters, and developer community. Your commitment, feedback, and ideas are what make our open platform truly special. We hope you you enjoy the new SmartThings experience.    
Read More

Our Most Popular Categories